GROUTING FAQs

Epoxy grout is far less likely to shrink or crack because it cures through a controlled chemical reaction rather than depending on water evaporation like conventional cement grout.

Cement-based grout is mixed with water and hardens through cement hydration. If too much water is added, the joints are cleaned with excessive water, or the mixture dries too quickly, the grout can lose volume as it cures. This shrinkage may produce hairline cracks, low joints, powdering or small gaps along the tile edges. Uneven water measurement across multiple batches can also create inconsistent strength and curing results on larger projects.

Epoxy grout uses resin and hardener that react chemically to form a dense, strongly bonded joint. Because the system contains little or no water that must evaporate, it experiences significantly lower curing shrinkage than standard cement grout. Once properly cured, its dense structure provides high mechanical strength, low water absorption and strong adhesion to tile and stone edges. This is why epoxy grout is commonly preferred for wet areas, commercial kitchens, hospitals, laboratories and high-traffic installations where frequent joint repairs would be disruptive. Tested professional epoxy systems can achieve extremely low shrinkage and water absorption when mixed and installed correctly.

MBEPOXY® epoxy grout is formulated to create a solid, moisture-resistant and chemically resistant joint that retains its shape and finish more effectively than ordinary cement grout. Its strong bonding and low-shrinkage performance help reduce common problems such as joint cracking, water absorption, staining and early deterioration.

However, no grout can compensate for structural movement. Epoxy grout may still crack if the floor or wall deflects, tiles become loose, expansion joints are filled with rigid grout, the resin-to-hardener ratio is incorrect, or the joints are not packed completely. Movement and expansion joints must use an appropriate flexible sealant rather than epoxy grout.

For the best results with MBEPOXY®, installers should measure both components accurately, mix thoroughly, fill the joints completely, clean the tile within the recommended working time and allow full curing before opening the area to traffic or washing. Proper application allows the product’s low-shrinkage formulation to deliver a stronger, cleaner and longer-lasting joint.

Yes, epoxy grout is waterproof and suitable for swimming pools, bathrooms, commercial kitchens and other continuously wet areas when it is correctly mixed, applied and cured.

Unlike conventional cement-based grout, epoxy grout forms a dense, non-porous joint that does not readily absorb water, stains or cleaning chemicals. This makes it particularly useful where tiled surfaces are regularly exposed to moisture, frequent washing and demanding hygiene requirements. Typical applications include swimming pools, shower areas, washrooms, food-processing facilities, hospitals, laboratories, commercial kitchens, spas and wet industrial areas. MBEPOXY® epoxy grout is designed to provide strong, durable and moisture-resistant joints for both floor and wall tiles.

For pool applications, the grout must be applied only after the tile adhesive and substrate have been properly prepared and cured. The tile joints should be clean, dry and free from dust, loose material and standing water. Resin and hardener must be measured accurately, mixed thoroughly and pressed completely into the joints without leaving air gaps. The surface must then be cleaned within the product’s recommended working time and allowed to cure fully before the pool is filled with water.

It is also important to understand that epoxy grout seals the joints but should not be treated as a substitute for the complete waterproofing system beneath the tiles. Pools and wet commercial areas still require proper substrate waterproofing, drainage, movement joints and suitable tile installation. Movement or expansion joints should be filled with an appropriate flexible sealant rather than rigid grout.

MBEPOXY® epoxy grout helps avoid common wet-area problems such as water absorption, staining, discolouration, mould-supporting porous joints and premature grout deterioration. For pool environments involving chlorine, cleaning chemicals or constant immersion, customers should share the exposure conditions with the MBEPOXY® team so that the correct system and application process can be confirmed. MBEPOXY® also offers epoxy waterproofing solutions designed for swimming pools and other moisture-exposed surfaces.

Yes, epoxy grout is well suited for high-traffic commercial and industrial flooring when correctly selected, mixed and installed.

Epoxy grout is designed for demanding tiled-floor applications where joints are exposed to frequent foot traffic, wheeled equipment, repeated cleaning, moisture, oils or chemicals. Unlike conventional cement grout, it cures into a dense, non-porous joint with strong adhesion to tile and stone edges. This helps the grout resist water absorption, staining, erosion and premature deterioration under regular use. For these reasons, epoxy grout is commonly used in factories, warehouses, hospitals, laboratories, commercial kitchens, shopping areas, workshops, wash zones and other high-usage environments.

Its chemical-curing system also gives it better mechanical strength and lower shrinkage than ordinary cement-based grout. Properly filled epoxy joints help support tile edges and reduce the risk of joint breakdown or edge chipping under traffic. The smooth, low-porosity surface is easier to clean and maintain, which is especially valuable in food-processing, healthcare and industrial areas where hygiene and repeated washing are important.

However, suitability depends on the complete flooring system. The substrate and tile adhesive must be strong enough for the expected loads, the joints must be clean and dry, and the resin, hardener and filler components must be mixed in the specified proportions. Epoxy grout should not be used to fill structural expansion or movement joints; those areas require an appropriate flexible sealant. The finished area must also be allowed to cure fully before it is opened to heavy traffic, machinery or aggressive cleaning.

MBEPOXY® epoxy grout is developed for durable, moisture-resistant and chemical-resistant tile joints in commercial and industrial environments. Selecting the appropriate grade and following the recommended application process helps avoid common problems such as porous joints, staining, shrinkage, cracking and frequent maintenance.

Yes, once fully cured, epoxy grout is highly resistant to moisture, staining and many chemicals and acids; however, resistance depends on the chemical type, concentration, temperature and exposure duration.

Epoxy grout forms a dense, non-porous joint that does not readily absorb water, oils, dirt or coloured liquids. This makes it easier to clean and less likely to develop permanent stains than conventional cement-based grout. It is particularly suitable for commercial kitchens, food-processing areas, hospitals, laboratories, factories, washrooms, swimming-pool areas and industrial floors where tile joints may be exposed to frequent washing, spills and cleaning agents. MBEPOXY® describes its epoxy grout as moisture-resistant, stain-resistant and capable of withstanding chemicals, oils and cleaners when correctly applied and cured.

Epoxy grout can also tolerate exposure to many commonly encountered acids, alkalis, detergents and industrial chemicals. However, it should not be described as universally resistant to every chemical. Strong acids, concentrated solvents, high temperatures or continuous immersion may require a specially selected formulation. For demanding industrial applications, customers should share the exact chemical name, concentration, exposure temperature, contact duration and cleaning frequency before finalising the product. This allows the suitability of the resin system to be assessed more accurately.

Correct installation is essential for achieving the expected resistance. The tile joints must be clean and dry, all components must be measured and mixed in the specified ratio, and the grout must be packed completely into the joints. The surface should then be cleaned within the recommended working time and allowed to cure fully before exposure to water, chemicals or aggressive cleaning.

MBEPOXY® epoxy grout helps reduce common problems associated with porous cement grout, including water absorption, staining, discolouration and chemical deterioration. By selecting the appropriate MBEPOXY® system for the actual exposure conditions and following the recommended application process, customers can achieve cleaner, stronger and longer-lasting joints in demanding commercial and industrial environments.

The pot life is approximately 40–45 minutes after all epoxy grout components are completely mixed.

Pot life refers to the usable working period available after the epoxy resin, hardener and required grout components have been combined. During this 40–45-minute window, the installer should apply the grout, press it firmly into the tile joints, remove excess material and begin the recommended cleaning process. Once the pot life has passed, the mixture will gradually become thicker and more difficult to spread, compact or clean properly.

The working time should be planned carefully, especially for large commercial or industrial areas. Installers should mix only the quantity they can comfortably apply within the available period rather than preparing an excessively large batch. The official MBEPOXY® guidance recommends mixing the pre-measured components thoroughly until a smooth and uniform consistency is obtained, applying the material with a rubber float, filling the joints completely and removing excess grout while it remains workable.

Actual pot life can vary with the temperature of the room, tiles and materials. Warmer conditions or a large quantity left together in one mixing container can accelerate the chemical reaction and shorten the usable time. Cooler conditions may provide slightly longer working time but can also slow the final curing process. Therefore, the grout should be kept away from direct sunlight and excessive heat during mixing and application.

Do not attempt to extend the working time by adding water, solvents or extra resin after mixing. Such additions can disturb the formulation and reduce curing, strength, chemical resistance and final joint quality. MBEPOXY® epoxy grout is designed as a controlled multi-component system, and correct measurement, thorough mixing and timely application help produce dense, durable and moisture-resistant joints.

No, custom-manufactured grout colour batches are not currently produced for large tiling contracts.

MBEPOXY® epoxy grout is supplied in the available standard colour options rather than being manufactured in a project-specific shade. Contractors, architects and procurement teams should therefore review the available colour range and select the closest suitable option for the tiles, stone, interior design or commercial environment before confirming a bulk order.

Using a standardised colour range supports greater consistency between packs and repeat supplies. This is particularly important on large projects, where grout may be applied across multiple rooms, floors, buildings or installation phases. Epoxy grout is valued for maintaining its colour and finish over time, provided that the components are accurately measured, thoroughly mixed and applied according to the recommended process.

Before ordering the full project quantity, customers should request the available colour options and evaluate the selected shade alongside the actual tile or stone. Colour perception may change depending on the tile surface, joint width, lighting conditions and surrounding finishes. A small trial panel is recommended so that the contractor, designer and client can approve the grout colour before full installation begins.

Adding unapproved pigments, dyes, paint or other colourants directly at the site is not recommended. Altering the supplied grout formulation may affect curing, colour uniformity, strength, stain resistance or chemical resistance. It may also cause noticeable shade variation between separate batches.

Although custom colour production is unavailable, the MBEPOXY® team can assist customers in selecting the closest available standard shade and planning the required quantity for the complete tiling project. Ordering sufficient material from the approved colour option at one time can also help minimise visible colour variation across large installations.

No, we do not currently produce customised “food-industry-grade” or “hospital-grade” flooring formulations; however, suitable standard MBEPOXY® flooring systems are available for many such environments.

For food-processing facilities, commercial kitchens, pharmaceutical units, hospitals and diagnostic areas, flooring selection should be based on the actual operating conditions rather than the industry name alone. Important factors include expected foot and trolley traffic, exposure to water, oils, cleaning chemicals or disinfectants, slip-resistance requirements, hygiene procedures, drainage conditions and the quality of the concrete substrate.

MBEPOXY® Screed Coat Flooring Resin is a standard high-performance flooring system intended for demanding industrial areas. It provides a durable, seamless and chemically resistant surface and is listed for applications including food and beverage processing areas, pharmaceutical production, commercial kitchens and wet areas. Slip-resistant performance can also be created using suitable aggregates during application.

Similarly, MBEPOXY® Base Coat Flooring Resin is listed for food and beverage processing plants, pharmaceutical and cleanroom facilities, hospitals and diagnostic laboratories as part of a properly designed flooring system. These standard products may be combined with the appropriate Primer, Screed or Base Coat and protective Top Coat according to the project’s traffic, cleaning and chemical-exposure requirements.

However, suitability for these environments should not automatically be interpreted as certification for direct food contact, sterile healthcare use or compliance with every regulatory standard. Direct food-contact surfaces may require a specifically compliant food-safe epoxy system, which is different from general industrial flooring.

Customers should share the application area, cleaning chemicals, traffic level, required texture and any mandatory certification before ordering. The MBEPOXY® team can then recommend the closest suitable standard flooring system and advise on layer selection, thickness and application, even though custom formulation is not currently available.

The minimum order quantity for contractor-scale bulk orders starts from 15 kg and can be increased to any required quantity.

The 15 kg starting quantity is suitable for flooring contractors, tile applicators, project suppliers and commercial installers who require more material than a standard retail pack but may not yet need full drum quantities. Customers can increase the order according to the total project area, joint dimensions, number of application stages, expected material consumption and site wastage.

For an accurate quotation, contractors should share the required product, total quantity, application type and delivery location. In the case of epoxy grout, material consumption depends on factors such as tile dimensions, tile thickness, joint width and total tiled area. For flooring resin systems, the required quantity depends on the selected layer, floor condition, application thickness and total square-foot area. Calculating these details before ordering helps prevent material shortages during installation and reduces the need to mix products from separate orders.

MB Enterprises has manufacturing and bulk-supply capabilities for contractors, industrial processors, distributors and OEM customers. Larger quantities can be arranged with suitable packaging and pan-India dispatch support, depending on the selected product and project requirement.

For projects completed in multiple phases, contractors should ideally plan the complete requirement in advance. Ordering the approved product quantity together helps maintain consistent product identification, shade and application performance across the site. Before confirming a large order, a sample or trial application may also be carried out where necessary.

The MBEPOXY® team can assist contractors with product selection, quantity planning, mixing guidance and application recommendations. Once the required quantity exceeds the 15 kg starting MOQ, the order can be scaled to match small commercial work, large tiling contracts or ongoing contractor requirements.

Yes, we provide a technical product catalogue with application guidance and essential safety instructions; product-specific technical and safety documents can also be requested when placing the order.

The MBEPOXY® technical catalogue is designed to help contractors, applicators and project teams understand the correct selection and use of the flooring system. It covers products such as Primer Resin, Screed Resin, Base Coat Resin, Metallic Flooring Resin, 3D Flooring Resin and Top Coat Resin, along with their main features and recommended applications.

The catalogue includes important technical guidance on concrete preparation, moisture testing, surface grinding, crack repair, application thickness, mixing resin and hardener by weight, trial applications and the recommended layer sequence. It also explains standard, heavy-duty and decorative flooring systems so customers can understand which products are required for different project conditions.

Basic safety and handling guidance is also included. The booklet advises applicators to use appropriate personal protective equipment, work in properly ventilated areas, keep the substrate clean and dry, avoid adding water or solvents, and follow the recommended mixing ratio and curing time. These precautions help reduce application failures and support safer handling at the project site.

It is important to distinguish the product catalogue from a formal Technical Data Sheet or Safety Data Sheet. The catalogue provides general technical, installation and safety guidance, while a formal TDS or SDS may contain more detailed product-specific information, such as viscosity, pot life, curing time, handling precautions, storage conditions and emergency measures. Customers requiring these documents for procurement, site approval, quality control or contractor compliance should mention the requirement while confirming the order so the available documentation for the selected MBEPOXY® product can be shared.

Packaging sizes for bulk contractor supply are arranged according to the product, total order quantity and specific project requirement.

MB Enterprises offers flexible packaging arrangements for contractors purchasing epoxy grout or other epoxy systems in commercial quantities. Instead of limiting every customer to one fixed bulk pack size, the packaging configuration can be planned according to the required quantity, expected site consumption, storage capacity, transportation method and application schedule. MB Enterprises supports bulk order fulfilment with custom packaging and pan-India logistics for contractors and industrial buyers.

For example, a contractor completing the work in separate phases may prefer multiple manageable packs so that only the required quantity is opened at one time. A larger continuous project may require fewer, higher-capacity packages to simplify handling and reduce the number of containers at the site. The final pack configuration is confirmed during quotation based on the total order requirement.

Where the product is supplied as a multi-component epoxy system, the resin, hardener and any other required component are packed separately in the correct proportions. Contractors should use the matching components from the supplied system and should not interchange materials from different products or batches. Each component must be accurately measured and mixed according to the recommended ratio before application.

Customers should share the total required quantity, number of project locations, preferred pack handling size and expected application schedule when requesting a quotation. This allows the MBEPOXY® team to recommend a packaging arrangement that is practical for transportation, storage and site use.

Although packaging can be arranged according to the bulk requirement, the final sizes remain subject to product compatibility, manufacturing feasibility and the confirmed order quantity. MBEPOXY® supports both smaller commercial orders and large contractor requirements, with the exact packaging plan finalised before production and dispatch.

Yes, sample testing is available before placing a full production or bulk order.

Customers can request a sample of the required MBEPOXY® product to evaluate its suitability before committing to a larger commercial quantity. The sample may be tested in a laboratory, used for a small field application or applied on a trial section that represents the actual project conditions. This allows contractors, distributors, industrial buyers and project teams to review the product’s application behaviour and expected final performance before proceeding with full-scale procurement.

Depending on the product, the trial can help assess factors such as mixing consistency, viscosity, pot life, ease of application, adhesion, curing behaviour, colour, surface finish, chemical resistance and compatibility with the intended substrate. For epoxy grout applications, customers may also evaluate joint filling, cleanability, colour appearance, hardness and resistance to moisture or staining. Testing should ideally be carried out using the actual tiles, stone, surface conditions and installation method planned for the main project.

Customers should share the product name, intended application, required test quantity and any specific performance expectations when requesting a sample. Sample availability, pack size, pricing and dispatch terms may vary according to the selected formulation and testing requirement.

A properly conducted trial helps identify application requirements in advance, including suitable batch size, working time, cleaning procedure and curing schedule. It also gives the contractor and end customer an opportunity to approve the finish before bulk production begins.

MBEPOXY® supports sample-first evaluation because it helps customers select the appropriate product with greater confidence and reduces the possibility of compatibility, application or appearance-related concerns during the full production order.

MBEPOXY® epoxy grout is manufactured by MB Enterprises under an ISO 9001:2015-certified quality management system.

For commercial projects, the applicable certification is MB Enterprises’ ISO 9001:2015 certification. The company identifies itself as an ISO 9001:2015-certified manufacturer of epoxy resin systems serving construction and other industrial applications. This certification supports structured manufacturing procedures, quality-control practices, production consistency, documentation and continual process improvement.

For contractors, architects and commercial buyers, purchasing from an ISO-certified manufacturer provides greater confidence that the grout is produced through controlled and documented processes. This is especially relevant for hotels, hospitals, commercial kitchens, shopping spaces, industrial facilities, washrooms and other projects where consistent mixing, curing, colour and joint performance are important.

It is important to clarify that ISO 9001:2015 is a quality management system certification for the manufacturer. It should not be described as a separate product-performance approval for every commercial environment. ISO explains that ISO 9001:2015 specifies requirements for quality management systems, while certification may be used to demonstrate that an organisation follows the relevant standard.

Where a project requires additional approvals—such as a specific chemical-resistance test, food-contact compliance, hospital specification, swimming-pool standard or consultant-approved test report—the exact requirement should be shared before ordering. The MBEPOXY® team can then confirm which technical documents and available test information apply to the selected grout system.

Choosing MBEPOXY® grout from an ISO 9001:2015-certified manufacturer helps commercial customers benefit from organised production, quality-focused processes and technical guidance. However, the grout must still be mixed, applied, cleaned and cured according to the recommended instructions to achieve the expected durability, moisture resistance and chemical resistance.

Contractors should plan for a lead time of approximately 1–2 working days for order processing, packing, documentation and dispatch.

For large tiling projects, the order is generally prepared and dispatched within one to two working days after all commercial and technical details have been confirmed. This includes confirmation of the epoxy grout quantity, selected standard colour, required packaging, delivery address, billing details and advance payment. Where the required material and packaging are readily available, the order may be processed within one working day. Larger quantities, multiple packaging requirements or additional documentation may require up to two working days.

Contractors should note that this 1–2 day period refers to order preparation and dispatch, not the final delivery time at the project site. Transportation time depends on the destination, shipment weight, courier or transporter availability, local holidays and route conditions. For urgent or time-sensitive projects, the required quantity and expected application date should be shared with the MBEPOXY® team before confirming the order so that a realistic dispatch and delivery schedule can be planned.

It is advisable to place the order before the tiling work reaches the grouting stage. This provides enough time to receive the material, inspect the packages and organise applicators without delaying the overall project. Contractors should also calculate the complete grout requirement based on tile dimensions, tile thickness, joint width, total area and expected site wastage.

For phased projects, repeat orders can be scheduled according to the installation programme. However, ordering the approved colour and required quantity together is recommended wherever possible, as it helps maintain consistent appearance and product availability across the complete project. Shipment tracking or transport details are shared after dispatch for easier delivery coordination.

Yes, we offer distributorship and private-label supply options, with products available both with and without labels.

MB Enterprises supports distributors, resellers and commercial buyers who wish to supply epoxy products within their own market or customer network. Depending on the agreed arrangement, products may be supplied with the established MBEPOXY® branding, with the distributor’s approved private label, or without a retail label where the buyer manages its own branding and onward sale. MB Enterprises officially offers white-labelling and distributorship opportunities for businesses interested in marketing epoxy products under their own brand.

Under a standard distributorship arrangement, the distributor may purchase and resell MBEPOXY® products using the original company branding. This option is suitable for businesses that want to benefit from an established product identity and an existing range of epoxy systems. For buyers who prefer to build their own market presence, private-label supply can be discussed using the distributor’s approved brand name, logo and label design.

Products can also be supplied without a retail label, subject to the agreed order and packaging requirements. This option may be suitable for approved distributors, industrial buyers or resellers who manage their own labelling and sales process. However, essential information such as resin and hardener identification, mixing ratio, batch reference, handling guidance and safety instructions should remain clearly communicated to the end user.

The final arrangement depends on the selected product, required quantity, pack size, packaging format, labelling requirement and expected order frequency. Buyers should share their preferred business model, target market, product range and branding requirements before placing the first order. MB Enterprises’ bulk manufacturing and distribution capabilities also support ongoing commercial supply for distributors across India.