MB Epoxy Table Top Resin Kit

MB EPOXY TABLE TOP RESIN KIT (For 8 mm to 9 mm casting)

HIGHLIGHTED FEATURES:

·         Crystal Clear

·         Super High Gloss

·         Mixing Ratio 3:1

·         Very strong

·         Self  Levelling

·         100% Solid,  No VOCs

·         Great Air release

·         Suitable for all kinds of casting up to 10-15 mm

·         Slow cure (24 hours @ room temp.)

·         Heat resistant

PACKAGE INCLUDES:

1 kg (Resin 750 grams + Hardener 250 grams)

4 Pigments 25 grams each (Ocean theme)

·         MB AQUA MARINE

·         MB NAVY BLUE

·         MB WHITE

·         MB IVORY (All the pigments are opaque)

DESCRIPTION:

MB EPOXY TABLE TOP RESIN is specially formulated to give a high gloss in clear casting and leaves a glass-like finish. This product provides a slow cure and property development at ambient and low temperatures without accelerators ad allows for a quick return to service.

Approved Applications:

o  Wood

o  Casting

o   Coffee table

o   Counter tables

o   Coaster

o   Tabletops

o   Craft coatings

o   Jewellery  making (small casting or multi-layered)

o   Hobbyist and craft making

o   Plaques and frames

o   Pebble coating

 TECHNICAL  DETAILS:

NOTE: The typical pot-life on this item is roughly 45-60 minutes based on mass and temperature.

The full cure is 24 hours at normal conditions.

MEASURE:

·         Wearing your gloves on, Pour the desired amount of Part A into a measuring container.

·         Pour Part B into the Part A container until it’s at the right mark to make it a 3:1 ratio.

·         You can refer to our resin coverage calculator to determine how much you'll need

·         https://www.mbenterprises.co/calculator

·         PRO TIP - Mix up a little more than you think you’ll need because you want to completely cover your work in one shot and not have to mix more later.

MIX:

·         Mix for at least 10-12 minutes in a round motion until the chemical is clear and free of striations

·         Allow the mixed components to stand in your mixed cup for at least 2-5 minutes.

POUR:

·                Pour along the side of the container to help alleviate air entrapment.. This allows for bubbles to rise to the surface.

·                Small castings and potting units may take longer to cure than larger items.

WAIT:

·         MB EPOXY TABLE TOP RESIN needs to sit for several hours in a dust-free space while it cures.

·         In about 10-12 hours it will be touch dry.

·         It will be fully cured within 24  hours.

NOTE: Cold weather slows the curing process down, whereas heat speeds curing up